Probably Stolen: Production manuals and purity calculator

Quick Start Guide

1. Insert a filled water container with Ghostwater or Basewater. 2. Add some Minerals to make sure there's enough nutrient. 3. Insert power source and seed. 4. After a day or two, the farm should be ready for harvest.

Add water and replace the energy cell as needed to ensure that hydroponic keep running!

Tips for Novices Farmers

Start learning hydroponic by farming Nutrifruit. it is genetically modified to be an easy to farm crop. Make sure to keep enough clean water and add a nutriment tablet to the water when the yield decrease.

Advanced Guide

Water Quality:

Certain contaminants can harm the plant's growth. Make sure to use water with a low concentration of contaminants, unless you farming a crop with particular needs. (NOTE: Minerals are NOT contaminants.)

Nutrient:

Plants require Minerals to grow. Too little or too much can have negative impact on the yield. Each plant has specific nutrient concentration tolerance. Usually, it's better to have too much Minerals than not enough.

Plant Anaylser:

Can be used on a seed check its needs and their current health.

1. Introduction

Metal Ingots can be smelted inside a Furnace using TWO pieces of either Scrap Metal or Metal Ore. They can have various levels of purity. The higher the purity, the more valuable the ingot will be.

2. Smelting

The purity of an ingot is determined by the materials used to smelt it. Using Scrap Metals will yield a lower purity, while using Metal Ores will yield a higher one. Additionally, Flux Agent can be added to the furnace to improve the purity, Any added agent will be consumed. The Furnace requires a source of power. The smelting process happens overnight.

Tools and Machines

Chemical Supplies

Can be unpack to obtain various essential chemicals

Composition Spectrometer (Chem Scanner)

Use it on liquid container or chemical product to see their composition

Blender

Can be upgraded to improve analysis yield

Heating Plate

Can be upgraded to improve max temperature, temperature control and heating speed.

Evaporator

Work overnight to remove certain liquid such as water and alcohol. Use normal modules

Chem Finisher

Can be upgraded to reduce the amount of impurity introduced

Unlike other machines, most of the machine related to chemistry can only be upgraded with the special Chemical Equipment Module.

Dream Dust

Step 1: Ingredient Prep

- Attach a liquid container to the Blender - Add a few Dream Cap - Blend the ingredient to get Dream Cap Mush

Step 2: analysis

- Take the container from the previous step - Insert it into the Heating Plate - Add solvent (Alcohol) equal to 3-6 time the volume of Dream Cap Mush - Heat the mixure to 40-60C to turn Dream Cap Mush into Dream Cap Extract

Do not overheat or Dream Cap will be destroyed

Step 3: Evaporation

- (Optional) Filter the solution from the previous step with a Kotton Fabric as filter to remove large sized contaminants - Insert the container into the Evaporator - Make sure the Evaporator is powered with a Energy Cell - Wait until the next day for the Evaporator to work

Step 4: Packaging

- (REQUIRED) When all the water and alcohol has evaporated, insert the container into the Chem Finisher - Select Dream Dust as the recipe - Press the "Output" button - (Optional) Check purity with a Composition Spectrometer

Caffeine Pill Recipe

Step 1: Ingredient Prep

- Attach a liquid container to the Blender - Add a few Coffee Beans - Blend the ingredient to get Coffee Beans Mush

Step 2: analysis

- Take the container from the previous step - Insert it into the Heating Plate - (Optional but Recommanded) Add solvent (Alcohol) equal to 3-6 time the volume of Coffee Bean Mush - Heat the mixure to a minimum of 80C

Note: Caffeine is very heat resistance

Step 3: Evaporation

- (Optional) Filter the solution from the previous step with a Kotton Fabric as filter to remove large sized contaminants - Insert the container into the Evaporator - Make sure the Evaporator is powered with a Energy Cell - Wait until the next day for the Evaporator to work

Step 4: Packaging

- (REQUIRED) When all the water and alcohol has evaporated, insert the container into the Chem Finisher - Select Caffeine Pill as the recipe - Press the "Output" button - (Optional) Check purity with a Composition Spectrometer

Chemistry Purity Rating

Some customers will carry Chem Scanner to verify the labeled purity of your products.

Pure Grade (99%+)

Pharma Grade (90-99%)

Near Pharma (80-90%)

Street Standard (60-80%)

Cut Product (45-60%)

Junk Grade (30-45%)

Starch Grade (30%-)

+200% of Base Value

+125% of Base Value

+75% of Base Value

No Price Modifier

-45% of Base Value

-75% of Base Value

-95% of Base Value

Water quality affects wine quality. Use High Quality Water or Base Water. Pure Water lacks the minerals needed for fermentation. Lower grades of water will greatly reduce wine quality.

Standard yeast is optional but highly recommended. Without it, wild yeast from the air will ferment the wine instead, producing inconsistent results. Standard yeast also greatly accelerates fermentation.

Berry quality is the most important factor. One handful is enough for lower-grade wine. Two handfuls are necessary for high-grade wine. Avoid overripe, underripe, or moldy berries. The best berries for winemaking are usually smaller than normal.

Normal

Underripe

Moldy

Small